RAGE 1200.4
Since the introduction of Quattro amplifiers in the early 2000s, the RAGE 4 channel has continued the tradition for two generations and have already been present since 2018. This latest innovation marks a departure from the trusted B2 platform, featuring input on one end and output on the other. While maintaining a semblance of the older heat sink, the rear side has been adapted to align with the same profile. The sleek white appearance, (on top of the front connection panel) well-known for over 15 years, remains unchanged.
UNLEASH YOUR POTENTIAL
Why settle for good when you can be great? Our new platform takes versatility to the next level, perfect for creating a multi-channel audio experience that is a strong contender. With sleek optics and user-friendly front panel design, installation and tuning are a breeze. Plus, you'll have plenty of space to customize your sound settings and take your audio to the next level.
The 1200-watt RMS power output is split equally among the four channels, which are even bridgeable. You can then opt for a tri-mode system where you have 2 x 300 watts powering the front speakers, while 600 watts are handling a mid-woofer or even a subwoofer. With truly extensive crossovers that can be configured as both low-pass, high-pass, and even bandpass, there are no limitations on what type of driver you will be connecting.
| Frequency Response: | Signal to Noise Ratio: | Input Sensitivity: | Crossover Slope: | Low Pass Crossover: |
|---|---|---|---|---|
| 10 Hz ~ 24 KHz (-3 dB) | >90 dB | 6 V ~ 0.2 V | 12 dB / Oct | 50 Hz ~ 5 KHz |
| High Pass Crossover: | Phase: | Damping Factor: | Power Terminal gauge: | Fuse Rating: |
| 20 Hz ~ 4 KHz | ~ | >200 | 2 GA | 100 A |
| Operational voltage: | Dimensions: | Power @ 4 Ω 14.4v: | Power @ 2 Ω 14.4v: | Power @ 4 Ω bridge 14.4v: |
| 10 V ~ 16.5 V | 10.9 x 6.69 x 2.26" / 27.8 x 17 x 5.7 cm | 4 x 200 w | 4 x 300 w | 2 x 600 w |
Reviews
There are no reviews yet.